|
|
|
Zgrip iPhone Jr.
|
See details
|
|
SKU: Z-ZG-IPJ
Zacuto recently released the Zgrip iPhone Pro and promised a consumer version was coming, well, here it is the Zgrip iPhone Jr. With the Zgrip iPhone Jr., you have many of the same features of its big brother, Zgrip iPhone Pro minus the adjustability. The Zgrip iPhone Pro has more adjustability but both give you the key feature which is stability when shooting with the iPhone 3Gs.
Zgrip iPhone Jr. is a handgrip system for shooting professional stable video using the iPhone 3Gs. The iPhone 3Gs snaps into the iPhone cradle which is attached to the handgrip. The handgrip has a ¼ 20” thread on the bottom so you can mount it to a tripod. It also has a ¼ 20” thread on the top for mounting accessories such as a light.
The Zgrip iPhone Jr. is developed by Zacuto the leading indie camera accessories maker in the professional market. All Zacuto products are designed and made in the USA and have a lifetime warranty.
Our price: $69.00
|
|
|
|
|
|
Zgrip iPhone Pro
|
See details
|
|
SKU: Z-ZG-IP
Zacuto has the first serious solution for shooting video with the iPhone 3Gs. It’s all about the stability and our solution adds just that. There is far too much side to side movement when shooting with an iPhone 3Gs even when trying to hold it with two hands very steady.
Zgrip iPhone PRO is a completely adjustable, quick releasable handgrip system for shooting professional stable video using the iPhone 3Gs. The iPhone 3Gs snaps into the iPhone cradle, the cradle snaps into the Zacuto Zgrip and you are ready to shoot. The handgrip fully articulates, and all of the red levers allow you to adjust every angle to get those interesting creative smooth shots. We also have a couple of great accessories to help you shoot better sound, lighting & for getting up real high above people standing right by you and crowds. Add a 10” rod below in order to extend the iPhone over crowds. In order to mount a light or sound recorder, pick up the Zacuto Zicromount. We also have a tripod mount for your iPhone 3Gs so you can quickly go from your Zgrip iPhone to tripod in seconds, if desired. Please see the detailed pictures for pictures of the tripod mount. The tripod mount can be added below for $50.00. The iPhone tripod mount includes a Zud and a 2” female rod.
The Zgrip iPhone PRO is developed by Zacuto the leading indie camera accessories maker in the professional market. All Zacuto products are designed and made in the USA and have a lifetime warranty.
Our price: $295.00
|
|
|
|
|
|
Zound Hotshoe
|
See details
|
|
SKU: Z-ZND-H
The Zound Hotshoe is a quick release zacuto mount used to mount any device with a ¼ 20” (or 3/8 16”with ¼ 20” to 3/8 16” adapter) screw hole to the camera’s hotshoe. This kit is particularly designed to mount a sound device off the camera’s hotshoe but it can be used for other devices as well.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
List Price: $193.00
Our price: $183.35
|
|
|
|
|
|
DoubleMount, V3, includes 7" rods
|
See details
|
|
SKU: Z-DM3
Zacuto is the first to invent a device that has rods going off the back of a camera. This invention allows us to balance front heavy camera packages while adding mounting options for articulating arms, wireless plates and 12 volt battery power.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $235.00
|
|
|
|
|
|
MiniMount
|
See details
|
|
SKU: Z-MM1
The MiniMount is a universal mount that slides onto 15mm lightweight rods. The MiniMount can hold an articulating arm, or any device with a 3/8 16" screw. The MiniMount can also be retrofitted to z-release mount by adding a Zround Mount.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $175.00
|
|
|
|
|
|
Studio 15mm Minimount
|
See details
|
|
SKU: Z-MMA
The 15mm Studio MiniMount is a universal mount that slides onto 15mm Studio (offset) rods. The 15mm Studio MiniMount can hold an articulating arm, or any device with a 3/8 16" screw. The 15mm Studio MiniMount can also be retrofitted to be a z-release mount by adding a Zround Mount.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $190.00
|
|
|
|
|
|
Studio 19mm MiniMount
|
See details
|
|
SKU: Z-MMS
The 19mm Studio MiniMount is a universal mount that slides onto 19mm Studio (offset) rods. The 19mm Studio MiniMount can hold an articulating arm, or any device with a 3/8 16" screw. The 19mm Studio MiniMount can also be retrofitted to z-release mount by adding a Zround Mount.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $190.00
|
|
|
|
|
|
Q-Mount Lightweight
|
See details
|
|
SKU: Z-QML
Zacuto's univeral Z-Release mount for 15mm lightweight rod systems can be installed anywhere on your rod system without removing any equipment; it attaches by mounting underneath the rods and tightening the outer levers. The Q-mount lightweight has many uses including: mounting Zamerican arms for monitors, lights, harddrives, etc, other arms with Zacuto Zuds (available in 3/8 16" and 1/4 20" both male and female) or 15mm rods. The q-mount can also be used to create a lens support, check out Zacuto's Locking Lens Support.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $198.00
|
|
|
|
|
|
Studio 15mm Q-Mount
|
See details
|
|
SKU: Z-QMA
Zacuto's univeral Z-Release mount for 15mm studio offset rod systems can be installed anywhere on your rod system without removing any equipment; it attaches by mounting underneath the rods and tightening the outer levers. The Q-mount 15mm studio has many uses including: mounting Zamerican arms for monitors, lights, harddrives, etc, other arms with Zacuto Zuds (available in 3/8 16" and 1/4 20" both male and female) or 15mm rods. The q-mount can also be used to create a lens support, check out Zacuto's Locking Lens Support.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $250.00
|
|
|
|
|
|
Studio 15mm Centered Q-Mount
|
See details
|
|
SKU: Z-QMAC
Zacuto's univeral Z-Release mount for 15mm studio centered rod systems can be installed anywhere on your rod system without removing any equipment; it attaches by mounting underneath the rods and tightening the outer levers. The Q-mount 15mm centered has many uses including: mounting Zamerican arms for monitors, lights, harddrives, etc, other arms with Zacuto Zuds (available in 3/8 16" and 1/4 20" both male and female) or 15mm rods.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $250.00
|
|
|
|
|
|
Studio 19mm Q-Mount
|
See details
|
|
SKU: Z-QMS
Zacuto's univeral Z-Release mount for 19mm studio rod systems can be installed anywhere on your rod system without removing any equipment; it attaches by mounting underneath the rods and tightening the outer levers. The Q-mount 19mm studio has many uses including: mounting Zamerican arms for monitors, lights, harddrives, etc, other arms with Zacuto Zuds (available in 3/8 16" and 1/4 20" both male and female) or 15mm rods. The q-mount can also be used to create a lens support, check out Zacuto's Locking Lens Support.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $250.00
|
|
|
|
|
|
Zaffer
|
See details
|
|
SKU: Z-ZFFR
Many people have been asking for it and now it's here. The Zaffer is a combination of the Avenger Super Clamp and the Zacuto Zicromount. The Zaffer allows you to attach 15mm rods or Zamerican arms to mount monitors, lights, hard drives and so on, to anything you can clamp the Zaffer on to, such as tripod legs. The Zaffer clamp range is .51" to 2.1".
Our price: $99.00
|
|
|
|
|
|
Zano
|
See details
|
|
SKU: Z-ZNO
The Zano is a combination of the Manfrotto Nano Clamp and the Zacuto Zicromount. The Zano allows you to attach 15mm rods or Zamerican arms to mount monitors, lights, hard drives and so on, to anything you can clamp the Zano onto such as tripod legs. The Zano clamp range is .51" to 1.38".
Our price: $95.00
|
|
|
|
|
|
Z-Riser
|
See details
|
|
SKU: Z-RI
The Z-Riser includes 4.5" female rods and attaches to 15mm lightweight rods with standard 60mm spacing between the rods. It allows you to raise or lower a new set of 15mm rods to accommodate accessories, like a matte box/follow focus. A Z-riser is necessary for most Depth-Of-Field adapters such as the Letus35 Adapters. A Z-riser is also necessary for the RED ONE Camera setups where lens height is extremely high.
Universal Baseplate not included.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $330.00
|
|
|
|
|
|
Grill Adapter
|
See details
|
|
SKU: Z-GRL
The Grill adapter attaches a Jeep to a Universal Baseplate which allows the Zacuto baseplate to have 19mm studio, 15mm studio rods (Arri) or 15mm lightweight rods off the front of the baseplate. The track built-in to the Grill adapter allows you to adjust all rods to whatever lens height you need, like a built-in Z-riser. Left to right movement is achieved with the Zacuto baseplate.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $59.00
|
|
|
|
|
|
Jeep
|
See details
|
|
SKU: Z-J-1
Jeep - Zacuto's universal rod adapter easily bridges the gap between 15mm lightweight (60mm spacing), 15mm studio (100mm spacing) and 19mm studio (104mm spacing) rail systems. This versatile tool expands the functionality of your equipment by allowing you to mix and match gear that was intended for different size rail systems.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $265.00
|
|
|
|
|
|
Zdapter Backplate
|
See details
|
|
SKU: ZL-BP
The Zdapter backplate allows you to mount Zacuto Z-locks in 15mm (lightweight), 19mm (studio), 5/8" (Panavision rods, light stand spuds/C-Stand arms) in several different configurations.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $60.00
|
|
|
|
|
|
Z-Rail
|
See details
|
|
SKU: Z-R-1K
The Z-Rail Kit has one hard mounted z-lock and the other Z-lock can slide along the rail to up to a 100mm spacing. A third Z-lock could be added as well to expand its functionality. Z-locks are available in 19mm, 15mm and 5/8” sizes. Z-Rail kit includes 2 z-locks of choice and a zdapter backplate.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $283.00
|
|
|
|
|
|
|
|
|
|
| Result pages: |
1 |
2 |
 |
|
|
