|
|
|
1/4 20" Lens Support
|
See details
|
|
SKU: Z-1/4-LS
The 1/4 20" Lens Support uses a 1/4 20" screw to screw directly into a variety of lenses for more support. This lens support clamps to the rods from underneath so it can quickly be taken off the rods. The middle rod that attached to the lens has vertical adjustment, if needed (please select the rod size below). Only thumb screw tightening is necessary, no tools required. This lens support can be used with a variety of rod sizes. Please select the rods that are being used below for the q-mount.
1/4 20" Lens Support Includes:
Rod (please select the size of rod needed)
1/2" to 1/4 20" adapter
Q-Mount
Our price: $237.00
|
|
|
|
|
|
Z-stop
|
See details
|
|
SKU: Z-Stop
The Z-stop is a handy tool for anyone using a depth-of-field adapter (DOF). It slides onto a 15mm rod and keeps your original camera lens from moving when using a depth-of-field adapter. No more accidentally moving the camera lens out of focus!
Our price: $95.00
|
|
|
|
|
|
Zian
|
See details
|
|
SKU: Z-ZN
The Zian is a locking lens support that uses a 1/4 20" screw to screw directly into a variety of lenses. The 1/4 20" screw can be adapted to other thread sizes to accommodate all lenses. The 1/4 20" screw has the ability to move approximately 3/4" side to side. Only thumb screw tightening is necessary, no tools required.
The Zian can be purchased seperately or as a kit.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $185.00
|
|
|
|
|
|
Zian Lens Support Kit
|
See details
|
|
SKU: Z-ZN-K
The Zian is a locking lens support that uses a 1/4 20" screw to screw directly into a variety of lenses. The 1/4 20" screw can be adapted to other thread sizes to accommodate all lenses. The 1/4 20" screw has the ability to move approximately 3/4" side to side. Only thumb screw tightening is necessary, no tools required.
The Zian can be purchased seperately or as a kit.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $395.00
|
|
|
|
|
|
Zupport
|
See details
|
|
SKU: Zup-1
The Zupport is a lens support that screws into the bottom of any Zacuto male rod, which can be mounted with any Zacuto mount that accepts 15mm rods; this includes the Q-Mount’s (all sizes) and the Z-Mount II. A Zip Gear can be strapped around the lens and secured to the Zupport for added stability and to prevent it from rotating.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $82.00
|
|
|
|
|
|
ZipGear Universal (any lens), 1 13.5-inch adjustable gear
|
See details
|
|
SKU: Z-ZG-16
Zacuto Universal ZipGear (any lens), 1 13.5-inch adjustable gear. Works on any camera, prime or zoom lens. Kit comes with 13.5" plastic gear and black gear locking housing. Just wrap the gear around the lens, cut to size, press on gear locking housing and tighten. Installation takes one minute.
All zipgears are a .8 pitch.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $68.00
|
|
|
|
|
|
ZipGear Universal with stop (fits any lens)
|
See details
|
|
SKU: Z-ZG-16S
Zacuto Universal ZipGear (fits any lens), 1 13.5" adjustable gear, 1 stop housing. Works on any camera, prime or zoom lens. Just wrap the gear around the lens, cut to size, press on gear locking housing and tighten. Install stop housing to stop at infinity. Installation takes one minute.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $94.00
|
|
|
|
|
|
ZipGear- Prime lens kit
|
See details
|
|
SKU: Z-ZG-PLK4
Zacuto Universal ZipGear prime lens kit includes four 13.5" adjustable gears and four gear locking housings. This kit is perfect for four prime lenses. Just wrap the gear around the lens, cut to size, press on gear locking housing and tighten. Installation takes one minute.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $265.00
|
|
|
|
|
|
ZipGear w/ stops- Prime lens kit
|
See details
|
|
SKU: Z-ZG-PLK4S
Zacuto Universal ZipGear prime lens kit includes four 13.5" adjustable gears, four gear locking housings and four stop housings. This kit is perfect for four prime lenses. Just wrap the gear around the lens, cut to size, press on gear locking housing and tighten. Install stop housing to create a focus stop. Installation takes one minute.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $369.00
|
|
|
|
|
|
HVX200 Repeatable Focus Ring with Stops
|
See details
|
|
SKU: Z-RP-HVX
Zacuto custom HVX200 repeatable focus ring with stops. The only product of its kind to allow the HVX200 to switch between having stardard hard stops at minimum focus/infinity and Macro mode.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
This is a demo item that was on display at conventions. Some might be slightly scratched but still have the Zacuto lifetime warranty. Limited quantities at a special clearance price- order yours today!
Was: $390
Now: $190
Our price: $190.00
|
|
|
|
|
|
|
|
|
|
|
|
