|
|
|
Z-Finder Jr.
|
See details
|
|
SKU: Z-FIND-JR
The Z-Finder Jr. is one of Zacuto’s Optical Viewfinders that allows DSLR cameras to have the correct form factor for video. It offers 2.5x focusable magnification, a 40mm diameter Zacuto optical designed lens, an eyecup preventing extraneous light leakage, and a field of view perfectly matched to 3” LCD screens. The Z-Finder Jr. does not have a diopter instead it uses Z-Finder Extender Frames to adjust the focal point. The Z-Finder Extender Frames attach to the skirt of the Z-Finder Jr. and allow you to semi-permanently stack the frames until the LCD screen is in focus for you.
The Z-Finder Jr. uses a mounting bracket that must be sandwiched in between a tripod plate and the camera. The bracket mounts to the ¼ 20” screw on your tripod plate and the actual Jr. is held in place with pressure from the fork of the bracket it sits in. You also have the option to mount the Z-Finder Jr. using the Z-Finder Mounting Frame (snap fit adhesive mounting frame) which is also included.
See customer reviews here!
Can't decide which Z-finder to buy? Check out our reference chart here!
Our price: $265.00
|
|
|
|
|
|
Z-Finder Pro 2.5x
|
See details
|
|
SKU: Z-FIND-PRO2
The Z-Finder Pro 2.5x is another one of Zacuto’s Optical Viewfinders that allows DSLR cameras to have the correct form factor for video. It offers 2.5x focusable magnification (3x is available),a 40mm diameter Zacuto optical designed lens, an anti-fog coating protective cover, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3” LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal point you can use the Z-Finder Extender Frames. The Z-Finder Pro 2.5x has a diopter range of -4.75 and up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extend the Z-Finder glass further way from the LCD screen for people who are farsighted.
This frame is not compatible with the D800, D4, 1DX, or 5D Mark III. We will have frames for these cameras in mid May 2012
See customer reviews here!
Can't decide which Z-finder to buy? Check out our reference chart here!
Our price: $395.00
|
|
|
|
|
|
Z-Finder Pro 3x
|
See details
|
|
SKU: Z-FIND-PRO3
The Z-Finder Pro 3x is another one of Zacuto’s Optical Viewfinders that allows DSLR cameras to have the correct form factor for video. It offers 3x focusable magnification (2.5x is available),a 40mm diameter Zacuto optical designed lens, an anti-fog coating protective cover, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3” LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal point you can use the Z-Finder Extender Frames. The Z-Finder Pro 3x has a diopter range of -2.75 and up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extend the Z-Finder glass further way from the LCD screen for people who are farsighted. This frame is not compatible with the D800, D4, 1DX, or 5D Mark III. We will have frames for these cameras mid May 2012
See customer reviews here!
Can't decide which Z-finder to buy? Check out our reference chart here!
Our price: $395.00
|
|
|
|
|
|
Gorilla Plate
|
See details
|
|
SKU: Z-GRB
The Gorilla Plate is used in both of our Gorilla Kits (Striker and Target Shooter) and must be used with the Z-Finder Pro.
The Z-Finder V2 will also work with this plate! You must also purchase a frame to mount your V2 onto the Gorilla Plate. The Gorilla plate attaches to your camera using the standard tripod screw hole. You can also mount your tripod plate underneath the Gorilla plate so you can quickly go from handheld to tripod use. For mounting the Gorilla plate to the tripod, it has (2) ¼ 20” screw holes and a locking pin hole. The Z-Finder frame attaches to the Gorilla plate using two thumb screws.
The thumb screws and slider are not included with the Gorilla Plate; they are included with the Z-Finder Frames. The frame can be removed by loosening the thumb screws and pulling up on the frame.
Our price: $69.00
|
|
|
|
|
|
Gorilla Plate Adapter
|
See details
|
|
SKU: Z-GRP-ADPT
The Gorilla Plate Adapter centers the tripod holes on the bottom of the gorilla plate. The Gorilla Plate Adapter is used in conjunction with the Zacuto Gorilla Plate. The Gorilla Plate adapter is needed to center the lens and camera between the rods if you are using a Z-Finder Pro with another manufacturer's rod support system supporting follow focuses and matte boxes.
Note: A height adjustable matte box is needed if using a matte box with the Gorilla plate on another manufactures plate system unless their plate system is height adjustable like the Zacuto DSLR Baseplate.
The Gorilla Plate Adapter comes with a longer 1/4 20" screw that will replace the smaller 1/4 20" screw that comes with the Gorilla Plate. You will need to take your screw out and use the longer one provided with the adapter to attach your camera to the plate.
Our price: $17.50
|
|
|
|
|
|
Z-Finder 3" Mounting Frame for Small DSLR Bodies
|
See details
|
|
SKU: Z-MFS
The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off. This frame is used on the small body cameras with 3" screens and no battery grips such as the Canon 5D Mark II, Canon 7D, Canon 550D Canon 60D, Nikon D90, Nikon D300, D7000 and other cameras of the same size. This frame is not compatible with the D800, D4, 1DX, or 5D Mark III. We will have frames for these cameras in mid May 2012.
Our price: $50.00
|
|
|
|
|
|
Z-Finder Mounting Frame for Canon 5D
|
See details
|
|
SKU: Z-MF5D
The Z-Finder Mounting Frame is specific for the Canon 5D Mark II camera only. The Z-Finder Mounting frame that is included with the Z-Finder Pro is a Universal Frame and it will with the Canon 5D, Canon 7D, Canon T2i and more. However, if you want a frame where the red thumb screws on the gorilla plate will cover the entire frame than this is your frame.
Please note, that this will NOT work with the 5D with battery grip, 7D, Canon T2i or any other camera. It will work solely on the Canon 5d Mark II. If you are using the cameras with a battery grip, then the battery grip frame is needed.
Our price: $63.00
|
|
|
|
|
|
Z-Finder 3" Mounting Frame for Small DSLR Bodies with Battery Grips
|
See details
|
|
SKU: Z-MFSB
The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off.
Please Note: This frame DOES NOT WORK with 3rd party battery grips.
Our price: $120.00
|
|
|
|
|
|
Z-Finder 3" Mounting Frame for Tall DSLR Bodies
|
See details
|
|
SKU: Z-MFT
The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure.. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off. This frame is used on the taller body cameras such as the Canon 1D Mark IV and Nikon D3s with 3" screens. This frame is not compatible with the D800, D4, 1DX, or 5D Mark III. We will have frames for these cameras in mid May 2012.
Our price: $95.00
|
|
|
|
|
|
Z-Finder 3" Mounting Frame
|
See details
|
|
SKU: Z-FRM
Want to put your Z-Finder on multiple cameras? This is the answer. Additional Z-Finder snap fit adhesive mounting frames.
This frame will work on the Z-Finder Pro and Jr as well.
This frame is not compatible with the D800, D4, 1DX, or 5D Mark III. A new frame is in development.
Our price: $6.00
|
|
|
|
|
|
Z-Finder Extender Frames
|
See details
|
|
SKU: Z-EF
The Z-Finder Extender Frames allow you to further adjust the focal point of the Z-Finder by semi-permanently stacking the frames via a snap fit on to the skirt of the Z-Finder until the LCD screen is in focus for you. This is primarily for people who are farsighted or who wear reading glasses. This item includes 4 extender frames; all 4 extender frames will not be needed for everyone. It is best to test how many frames you need by stacking one at a time until the LCD is in focus for you. In order for the Extender Frames to lock properly, a new skirt is needed on the Z-Finder.
If you ordered your Z-Finder prior to Jan. 25th 2010 and you are looking to get the extender frames, please contact sales@zacuto.com
Our price: $12.00
|
|
|
|
|
|
Z-Finder Dust Cover
|
See details
|
|
SKU: Z-ZFDC
You’ve been asking for it, and here it is! The Z-Finder Dust Cover! The secure Z-Finder Dust Cover snaps onto the body of your Z-Finder and protects the inside from dust and debris. It’s easy to take on and off and it’s great for shooting outside and traveling. A must have for any Z-Finder user.
All Jr and Pro Z-Finders purchased on April 18th 2011 or later will come with 1x Z-Finder Dust Cover included.
Our price: $6.00
|
|
|
|
|
|
Anti-Fog Protective Cover Upgrade Kit
|
See details
|
|
SKU: Z-AF-K
The anti-fog protective cover upgrade kit includes a pack of 3 anti-fog protective covers, a lens cap, and an eyecup. The anti-fog protective covers offer anti-fog and protection for your Z-Finder Pro and V2 lens. These covers are expendable* as customers may lose, scratch or damage these covers over time. If your Z-Finder Pro and V2 did not ship with the anti-fog protective covers then you will need this upgrade kit in order for them to work as the lens cap is slightly different than the one you have now. If your Z-Finder included the anti-fog protective covers, you can purchase just the anti-fog protective covers here.
*expendable items are only warranted for out of box manufacturer defects.
Our price: $22.00
|
|
|
|
|
|
Anti-Fog Protective Covers (Pack of 3)
|
See details
|
|
SKU: Z-AFPC
The anti-fog protective covers offer anti-fog and protection for your Z-Finder Pro and V2 lens. These covers are expendable* as customers may lose, scratch or damage these covers over time. They are meant to give you anti-fog and to help protect the actual lens on the Z-Finder. If your Z-Finder Pro and V2 did not ship with the anti-fog protective covers then you will need the Anti-Fog Protective Cover Upgrade Kit (pack of 3 with lens cap and eyecup) in order for them to work as the lens cap is slightly different than the one you have now.
*expendable items are only warranted for out of box manufacturer defects.
Our price: $12.00
|
|
|
|
|
|
Clarity Fog Eliminator-3 Pack
|
See details
|
|
SKU: CFE3
The Clarity Fog Eliminator dry towelettes are effective in preventing eyepiece fogging.
Breakthrough DRY anti-fog formula beats the others cold. Perfect for all outdoor sports. Who wants to be slowed down by fogged lenses? Clarity Fog Eliminator is the convenient, effective way to eliminate fogging due to cold temperatures and moist or high-humidity conditions.
Easy to use...fits in pocket, backpack or sports bag. Just wipe the dry cloth over the lens. No sloppy sprays or goop. Multiple applications from each cloth. Three times the anti-fog protection in a reclosable vinyl pouch.
Recommended for Zacuto Z-Finder Jr.
Our price: $4.99
|
|
|
|
|
|
Z-Finder 16x9 Sun Mask
|
See details
|
|
SKU: Z-FIND-MASK
The Z-finder 16x9 Sun Mask lessens the amount of sunlight passing through the Z-Finder to the EVF screen or camera LCD. This will lessen the likelihood of having sun damage on your EVF or camera LCD screen. This does not protect 100% so users must still use the lens cap when working outside every time the Z-Finder is not in use. The Z-Finder 16x9 Sun Mask is included with all EVF units as well as every Z-Finder.
To install, simply take off your eyecup and anti-fog shield. Place anti-fog shield on the lens and then place the 16x9 sun mask on top of the ant-fog shield. Make sure the sun mask is centered. Re-install your eyecup and you are ready to shoot.
Our price: $3.00
|
|
|
|
|
|
Bluestar Eyepiece Chamois
|
See details
|
|
SKU: Bluestar
This Bluestar chamois eye cushion in Oval Large microfiber synthetic leather is the perfect add on to any of the viewfinders in the Z-Finder line. The chamois is wheel-buffed to downy softness, making it the best thing to wear against your own skin. It is non-irritating, non-allergenic and fragrance-free.
Available only in Oval Large Red for the Z-Finder line.
Our price: $5.45
|
|
|
|
|
|
Z-Finder Storage Case
|
See details
|
|
SKU: Z-BG
The Z-Finder Storage Case is compatible with all Z-Finder models. It is a black bag with an embroidered Zacuto logo. It closes using Velcro. It can also attach to a belt to wear around your waist. This bag is sure to keep your Z-Finder clean and safe in your camera bags. The dimensions are: 8x5x4 inches.
Our price: $23.00
|
|
|
|
|
|
Zacuto Lanyard and Lanyard Hook for Z-Finder
|
See details
|
|
SKU: Z-LH
The Zacuto lanyard and lanyard hook are for the Zacuto Z-Finder, dslr optical viewfinder. The lanyard hook screws into the side (left or right) of the Z-Finder and allows you to attach the lanyard on. The lanyard is used as a security measure when shooting handheld to assure that the Z-Finder doesn't hit the ground when it gets bumped. Also, the lanyard is nice for when you want to take the Z-Finder off and on quickly.
Our price: $12.00
|
|
|
|
|
|
Z-Finder V2 Protective Upgrade
|
See details
|
|
SKU: Z-FPU
This kit is for Z-Finder V2 owners. It includes a protective boot, lens cap and new eyecup. The protective boot covers the threads on the Z-Finder V2 to prevent dust getting into the threads. The lens cap is to cover the lens to protect the lens from getting scratched when not in use. It also covers the lens to protect the LCD screen from sun damage when the z-finder is not being used. A new eye cup is needed in order for the lens cap to fit.
Our price: $12.00
|
|
|
|
|
|
Jumper
|
See details
|
|
SKU: Z-JMP
The Jumper is an accessory for customers who already own Zacuto’s DSLR Baseplate, or a kit that contains the DSLR baseplate, and would like to have Gorilla Kit run n gun capabilities. The Jumper attaches to the wedge on the top quick-releasable portion of the DSLR Baseplate. You can then mount a vertical rod via the Jumper’s 15mm hole to create a kit like the Target Shooter or Striker.
Our price: $65.00
|
|
|
|
|
|
Z-Bands
|
See details
|
|
SKU: Z-BNDS
Z-Bands are an option for the Zacuto Z-Finder. The Z-Bands are elastic rubber bands to help hold the Z-finder in place, it is not a way to hold the z-finder on the camera. The Z-Bands are just a security measure to hold the z-finder in place in case of accidental bumping just like the lanyard. The mounting frame and the Z-Bands must be used together. The Z-bands include 4 red aluminum balls and two elastic bands.
The Z-Bands work with the Z-Finder V2 and the Z-Finder Pros. They will not work with the Z-Finder JR.
Our price: $16.00
|
|
|
|
|
|
|
|
|
|
|
|
